Easy Applications to Sew Onto Hand Towels

This elementary dishtowel sewing project makes your kitchen look stylish and is a smashing way to upcycle old towels

Hey ya'll, today I'chiliad sharing how to sew a hanging towel with a costless pattern and then yous can make one too. The tab at the pinnacle keeps the towel securely hanging on the oven handle or drawer pull instead of getting knocked to the floor. A hanging kitchen towel can be a fun way to add a lilliputian mode to your space, and they are as well great gifts to stitch. In fact, this would be a beautiful souvenir set if paired with a potholder in the aforementioned or coordinating fabric.

I've wanted to do a tutorial for hanging dish towels for a while. When you have kids and dogs in the house, it seems that kitchen towels are more prone to falling on the flooring. Funny how that works. Merely the push to get me started on making these was actually bathroom towels. Nosotros've had a lot of bath towels that needed retiring in our house lately and I've been trying to extend their usefulness. This project is a slap-up way to upcycle those old bathroom towels. Simply cut off frayed edges and cut around threadbare spots and holes.

And now that I've sewn some for the kitchen, I think they'd as well be expert as hanging hand towels in the bathroom. Considering those same kids and dog in my house are guilty of knocking bathroom towels off the bar after drying their hands or just because they're bored (in the example of the dog).

Materials

These hanging towels stay on the stove on with a button and double fold bias tape finishes the raw edges. The push secures the towel to the stove handle then information technology tin't fall. I've too created a gratis pattern for the towel toppers that you can download to utilize if yous don't desire to typhoon your own template. And considering it only uses a modest amount of fabric, this project is good for using chip textile. The materials listing is

• The pattern. See beneath to become the complimentary one I made for newsletter subscribers or instructions to typhoon your own
• 1/2 inch wide double fold bias tape – a piffling over 1 thou. You lot can make your own bias record using this method. And this post shows how to sew double fold bias tape.
• Fabric for the hanging loop – two 7 inch width by 9 inch tall pieces
• Interfacing. I used lightweight fusible interfacing on each wrong side of my topper pieces, and so you'll demand two 7 inch width past 9 inch tall pieces of interfacing.
• A button. I used one that is 1 inch broad, widths from five/8 inches up to 1 1/2 inches will work. Alternatively, if you don't want to sew a buttonhole, so you could use sew on Velcro or a snap.
• Terry cloth or toweling cloth. I used an old bathroom towel and cut off the frayed edges. You'll cutting your towel piece to 12 inches by 12 inches square.
• Thread, needle, sewing machine, bones sewing notions

Get the Pattern

If you prefer to draft this kitchen towel sewing pattern for yourself, you can use basic shapes with dimensions below. Note that this draft includes a 1/ii inch seam allowance already.

Sew together the Dish Towel

Once you have your pattern, cut 2 toppers and 2 pieces of interfacing. Fuse the interfacing to the toppers and cut your 12 by 12 slice of toweling. And then scout the video tutorial beneath or on YouTube here to see how to make hanging towels.

Time needed:xv minutes.

How to Sew a Hanging Dish Towel

1. Sew on double fold bias record

   Sew the bias record over the raw edge of the towel on 3 sides to finish them, carefully mitering the corners. If you don't know how to sew on bias record, run across this post.

2. Sew together the towel topper pieces together

   Printing the lower raw edges of the towel toppers 1/2 inch to the wrong side. Place the towel topper pieces right sides together and stitch from the fold line around the elevation and cease at the fold line on the other side. Employ a 1/2 inch seam allowance.

3. Trim, turn and press

   Trim the seam allowances downwardly to i/4 inch, then plough the topper correct side out. Go on the pressed lower edges turned to the inside. Printing all the edges.

4. Pleat the towel and insert into the topper

   Fold a large pleat into the middle of the raw edge of the towel piece, and then that the width of the towel at the top is the aforementioned as the towel topper. Insert the elevation one/two inch of the raw border in betwixt the folded edges of the towel topper and then that it is enclosed between them. Pivot, making certain pins are inserted through the towel topper on both sides. All raw edges should be inside the topper piece.

5. Topstitch

   Topstitch around edges of towel topper to secure towel in betwixt layers.

6. Add together buttonhole and button

   Run up a buttonhole centered in the round end of the towel topper. For buttonhole help, see this mail. Fold the tab and mark where to sew the push button. Run up the push button on. For button sewing help, run into this post.

Reader Interactions

olsenthelint.blogspot.com

Source: https://mellysews.com/how-to-sew-a-hanging-towel-easy-diy-for-your-kitchen/